Geopolymer Composite Based on Potassium Silicate Solution with Different Grain Size Composition of the Filler

Authors

  • L. Kullová New Technologies – Research Centre, University of West Bohemia in Pilsen, Pilsen
  • T. Kovářík New Technologies – Research Centre, University of West Bohemia in Pilsen, Pilsen
  • D. Rieger New Technologies – Research Centre, University of West Bohemia in Pilsen, Pilsen
  • M. Čekalová New Technologies – Research Centre, University of West Bohemia in Pilsen, Pilsen

Keywords:

geopolymer, composite, granulometry, filler, viskosity, mechanical strength, microstructure

Abstract

This study deals with preparing geopolymer composite materials based on potassium silicate solution with the addition of different grain size composition of the filler. The influence of granulometry of added filler was studied in relation to viscosity, mechanical properties and microstructure of composite materials (apparent porosity, apparent relative density and bulk density) and to the relationship between them. It has been found that the composite samples showing the best mechanical properties contained a filler with a granulometric composition calculated by the Fuller-Thompson model and a reduced content of fine fractions (63–150 μm). These composite samples also exhibit the best microstructure characteristics.

Published

2016-08-15

How to Cite

Kullová, L., Kovářík, T., Rieger, D., & Čekalová, M. (2016). Geopolymer Composite Based on Potassium Silicate Solution with Different Grain Size Composition of the Filler. Chemické Listy, 110(8), 581–584. Retrieved from http://ww.w.chemicke-listy.cz/ojs3/index.php/chemicke-listy/article/view/174

Issue

Section

Articles

Most read articles by the same author(s)